Contact

Picket fencing

Picket fencing for station platforms and level crossings.

Fence planks are 5cm and each one is 15cm long.

Made from high impact polyurethane resin.

Simple to use, all you need to do is drill a hole and plant the fencing.

1 kit consists of 2 facia panels and 2 support panels to make a total

fence length of 30cm.

If you require a large order of fence panels, please contact us

about pricing.

Picket fence kit £5 ADD TO CART

Lineside fencing

Stop the cows getting on the line!

Line side fencing that comes with bases for free standing.

Made from high strength brown coloured polyurethen resin.

The fence ends have half thickness posts so that 2 fence panels can

slotted into one base.

Each panel is 7cm high by 27cm long.

If you require a large order of fence panels, please contact

us about pricing.

Lineside fence single £5 ADD TO CART

Lineside fence 10 pack £20 ADD TO CART

Telegraph poles

Build your own telegraph poles with our simple kits.

A choice of bar with either 2 insulators or 4.

To complete, a recommended pole of 9-10mm diameter is required.

The bars are made from high quality polyurethane resin.

Telegraph insulators x 4

15 pack £10 ADD TO CART

Telegraph insulators x 2

15 pack £10 ADD TO CART

Chimney Pots

Chimney pots for model buildings.They are unpainted, cast from UV

stable polyurethane resin. Suitable for outdoor use. 45mm tall by

14mm at narrow point below cap and the widest point at bottom of

cap is 17mm. They are not hollow all the way down to the bottom,

just the first 5mm or so and will require a light sand on the base

before fitting where it has come out of the mold. Please note that the

brick stack below the chimney pots are not included, nor is the roof

or the building shown in the picture for reference.

CHIMNEY POT

SINGLE £2.00 ADD TO CART

CHIMNEY POT

4 PACK £4.50 ADD TO CART

Chimney Pots and stack

Pack of 2 Chimney pots and 1 stack. They are unpainted, cast from

UV stable polyurethane resin. Suitable for outdoor use. Chimney

pots, 45mm tall by 14mm at narrow point below cap and the widest

point at bottom of cap is 17mm. The stack fits together like a jigsaw,

the idea being that its easier to change the angle where it fits on your

roof than a solid lump.

CHIMNEY POTS + Stack £7 ADD TO CART

Chimney Pots and stack

Pack of 2 Chimney pots and 1 stack. They are unpainted, cast from

UV stable polyurethane resin. Suitable for outdoor use. Chimney

pots,are square pattern, slightly tapered, 27mm tall by 14mm at

base The stack is 50mm high, 20mm wide by 40mm deep, and fits

together like a jigsaw,

the idea being that its easier to change the angle where it fits on your

roof than a solid lump.

CHIMNEY POTS + Stack £7 ADD TO CART

Square chimney pots

Square pattern Chimney pots.

Unpainted,

UV stable polyurethane resin. Suitable for outdoor use. Chimney

pots,are square pattern, slightly tapered, 27mm tall by 14mm at

base.

CHIMNEY POT Each £1.5 ADD TO CART

CHIMNEY POT 4 Pack £5 ADD TO CART

Whistle signs

Add some fun to your level crossing with these detailed

whistle signs, based on cast iron protypes.
Raised letters, numbers and edging making them easy to paint.
Hand made from polyurethane resin.
Suitable for permenant outdoor use.
Available with 3 inch post and base, or 6 inch sharp post for

sticking into the ground.
Requires painting.
Signs are sold individually as a set of- Post, Base, and Board.
See below to choose type

WHISTLE with base £2 ADD TO CART

WHISTLE with 6 inch post £2 ADD TO CART

Whistle signs

Add some fun to your level crossing with these detailed

whistle signs, based on cast iron protypes.
Raised W making them easy to paint.
Hand made from polyurethane resin.
Suitable for permenant outdoor use.
Available with 3 inch post and base, or 6 inch sharp post for

sticking into the ground.
Requires painting.
Signs are sold individually as a set of- Post, Base, and Board.
See below to choose type

W with base £2 ADD TO CART

W with 6 inch post £2 ADD TO CART

Station signs

Add some fun to your stationwith these detailed

whistle signs, based on cast iron protypes.
Raised Letters and numerals making them easy to paint.
Hand made from polyurethane resin.
Suitable for permenant outdoor use.
Add 3 inch post and base, or 6 inch sharp post for

sticking into the ground.
Requires painting.
Signs are sold individually without posts.
See below to choose type

Catch points £2 ADD TO CART

S W £1 ADD TO CART

Stop! £1 ADD TO CART

Way Out £2 ADD TO CART

Ladies and Gentlemen £2 ADD TO CART

6 inch post £1 ADD TO CART

3 inch post and base £1 ADD TO CART

Gradient boards

Add some fun to your layout with these detailed

gradient boards.
Raised letters and numbers making them easy to paint.
Hand made from polyurethane resin.
Suitable for permentant outdoor use.
The posts are approx. 3 inches long.

Requires painting.
Signs are sold individually as a set of- Post, Base, and

Board.

See below to choose gradient.